At the end of a shift, your production total may exist in three places: a machine display, a supervisor’s clipboard, and a spreadsheet in the office. If those numbers disagree, which one determines the next shift’s target? Production monitoring for…
An embroidery machine can run all shift and still leave the production manager with a basic question: how much usable work did it actually produce? A shaft pulse, a stitch displayed by the controller and a finished length of fabric…
Your machine counter says 1,200 units. The shift target was 1,400. Is your OEE 86%? No. That comparison tells you something about output against a target, but it does not establish how much production time was available, how fast the…
Your machine runs all afternoon. The counter climbs. Then the shift report disagrees with the number of parts in the finished-goods bin. The sensor may have counted every pulse correctly. The problem could be what those pulses represent. A production…
Machine utilization tracking measures how much of a shift a machine actually spends producing, and it reports the answer in real time: how long the machine worked, how long it sat idle, how much it produced, and when it stopped.…
