Industrial IoT · Designed & built in Pakistan since 2015

Make every machine talk.Even the 30‑year‑old ones.

Clamp-on sensors and live dashboards that predict failures, cut energy waste and count every unit, on the machines you already own. No PLC rewiring. No lock-in.

Talk to Our Team

Installs in under 1 hour
Open protocols
On-prem or cloud

Factory floor with IoTize sensors on pumps, presses and the main panel, streaming to one dashboard

FOLLOW THE DATA

One plant. Seven devices. One server.

Pumps, presses, the main panel and the room itself. Watch what each IoTize device reads and where its data goes.

Tour starting · tap a chapter to jump

01 · VIBRATION · PUMP-01, PUMP-02

Hear a bearing wear out weeks early.

Clamp-on vibration sensors read velocity and temperature on both pumps, every second, without touching the pump's controls.

2.13mm/s RMS

ISO ZONE A · OK

02 · COUNTER · PRESS-01 TO 03

Every stroke counted. Every slowdown flagged.

Counters log units, RPM and idle time on all three presses. PRESS-03 has dropped below its normal speed, so it's already marked amber.

PRESS-011,284units

PRESS-021,197units

PRESS-03742RPM · LOW

03 · 3-PHASE ENERGY · MAIN PANEL

The door stays shut. The data doesn't.

Inside the main panel, three CT clamps on L1, L2 and L3 feed a 3-phase energy meter: current, power factor and kWh for every phase.

L131.2 A

L230.6 A

L332.4 A

18.4 kWPF 0.91 · 412.6 kWh today

04 · ENVIRONMENT · ENV-01

Know the conditions your machines run in.

A wall-mounted environmental sensor tracks temperature and humidity on the floor, so heat and damp never surprise you.

TEMPERATURE31.4°C

HUMIDITY58% RH

STATUSOKin range

05 · IOTIZE SERVER

Every reading goes to one server.

All seven devices send their data to the IoTize server, on-prem in your plant or in the cloud. It stores it, checks it against your limits and drives the wall dashboard.

Live data feed

Connecting to 7 devices…

06 · ALERTS

Problems find you, wherever you are.

The moment PRESS-03 slows down, the server alerts the plant manager on their phone and laptop, on WhatsApp, SMS or email.

WhatsAppSMSEmailDashboard

LIVE · 7 DEVICES STREAMING

That's a whole plant, monitored. Installed in under an hour.

Tell us what machines you run and we'll suggest the right devices for them.

Get a free recommendation See live dashboards

Years building industrial IoT hardware

30+

Sites running IoTize devices in factories and buildings

100%

Designed, assembled and tested locally

Lock-ins. Your data goes wherever you decide

The problem

Your machines are already warning you. Nobody is listening.

Failures, waste and blind spots rarely come out of nowhere. The signals are there. They just never reach the people who could act on them.

Hover a card to see how we fix itEach problem flips to its fix. Tap to switch back.

PROBLEM 01SOLVED 01UnmonitoredMonitored

Breakdowns that "came out of nowhere"

Bearings and gearboxes change in vibration and heat weeks before they fail. Without sensors, you find out when the line stops.

SolutionPredictive Maintenance

PROBLEM 02SOLVED 02UnmonitoredMonitored

Power bills nobody can explain

Idle compressors, machines running between shifts, unbalanced phases. One bill for the whole plant hides where the money goes.

SolutionEnergy Monitoring

PROBLEM 03SOLVED 03UnmonitoredMonitored

Production numbers from a notebook

Hand-written counts arrive at the end of the shift, if at all. You can't fix idle time you can't see.

SolutionProduction Monitoring

PROBLEM 04SOLVED 04UnmonitoredMonitored

Drivers circling for a space that's already empty

Without occupancy data, car parks feel full when they aren't, queues build at the gate and nobody knows the peak hours.

SolutionSmart Parking

PROBLEM 05SOLVED 05UnmonitoredMonitored

EV chargers you can't brand, bill or manage

Off-the-shelf charging apps put someone else's name on your network and keep your session and billing data out of reach.

SolutionEV Charging

Solutions

One platform. Every signal your operation gives off.

See all solutions

Technician clamping a CT sensor onto a busbar next to an IoTize energy monitor

ENERGY · PANEL-A TODAY412.6 kWh · ▼ 8.4%

ENERGY MONITORING

See every kilowatt, per machine, per shift.

Single and three-phase monitors with clamp-on CTs show exactly where power goes, so you can switch off waste and balance loads.

Per-machine kWh, power factor and phase balance

Idle and after-hours consumption alerts

Running-hours logging for maintenance

Explore solution See devices

IoTize.ORG DIN-rail production counter wired into a factory control panel

COUNTER · LINE-21,284 units+1

Typical retrofit: under an hour

Clamp-on sensors, no PLC changes

How it works

From old machine to live data in three steps.

Clamp on

CT clamps, vibration and proximity sensors attach to what you already run. DIN-rail mounted, no rewiring of your controls.

Connect

Wi-Fi, Ethernet or RS485, over open protocols. Data goes to our platform, your cloud, or a server in your building.

See & act

Live dashboards, shift reports and alerts on WhatsApp, SMS or email the moment a machine drifts out of range.

Talk to Our Team

Customized for every client

Every site gets its own dashboard.

Real IoTize dashboards running on demo data. Every site gets a dashboard built around its own machines, layout and KPIs. These show what yours could look like.

Your machinesYour layoutYour KPIsYour alerts

IoTize machine health and predictive maintenance dashboard, dark theme

IoTize plant manager overview dashboard, light theme

Machine health · DarkPlant manager · Light

Drag the handle to compare

Talk to Our Team

Your data, your way

Your data. Your servers. Your call.

Many IoT platforms keep your data in their cloud and charge monthly just to access it. IoTize devices use open protocols, so you can host it yourself, use your private cloud, or send it straight to your SCADA or ERP. Switch anytime and take your full history with you.

You stay because it works, not because you're stuck.

MQTTHTTP / RESTModbus TCPOpen API

Ask about on-prem setup

IoTize device

On-premisesA server inside your plant. Nothing leaves the building.

Your private cloud, SCADA or ERPAWS, Azure or your own stack.

IoTize.ORG platformNo setup. Export your data anytime.

Built in-house since 2015

We don't just sell devices. We support them for years.

Every IoTize device is designed, assembled and tested by our own team, and supported by the same engineers who built it.

Setup & installation help

We guide your team through mounting, wiring and first data, on site or remotely.

Remote troubleshooting

Most issues are found and fixed over the network, without waiting for a visit.

WhatsApp, phone & email

Reach an engineer the way that suits you, not a ticket queue.

Long-term device support

Firmware updates, repairs and replacements for the life of your installation.

Our clients

Choose your path

Start with one machine. Scale to the whole plant.

Smart Machine Temperature Monitor SMT-10

IoT Production Counter Device

AFFORDABLE SERIES

For legacy factories

Get visibility on older machines without a big project. Plug-and-play counters and monitors.

from$80

✓Production counters, runtime & idle
✓Single-phase energy basics
✓Cloud dashboard included

Browse Affordable

Vibration Monitoring Device

ENTERPRISE SERIES

For smart factories

Industrial-grade sensing, edge processing and integration with your SCADA, ERP or MES.

from$160

✓Encoder A/B/Z, three-phase energy, vibration
✓Open protocols and edge alerts
✓On-prem, private cloud or SaaS

Browse Enterprise

IoT Entry/Exit Vehicle Counter VC-100

CUSTOM SERIES

Built to your spec

Need a sensor, enclosure or protocol that doesn't exist yet? Our hardware team designs and builds it.

Custom quote

✓Custom PCB and firmware
✓Marine, CAN bus and special I/O
✓White-label available

Talk to Our Team

Guides & resources

Guides for plant managers and engineers.

Visit the blog

Vibration sensor mounted on an electric motor

PREDICTIVE MAINTENANCE

FAQ

Questions factory owners ask us.

Something else on your mind? Ask our engineers directly.

Ask an engineer

Will it work on our old machines?

Yes. Many of our installs are on machines 10 to 30 years old. Our sensors clamp on or mount externally, so nothing inside the machine or its controls needs to change.

Do we have to use your cloud?

No. Our devices use open protocols such as MQTT and HTTP, and many models also support Modbus TCP. Send data to our platform, your own cloud, or a server inside your plant, and switch any time.

How long does installation take?

A single device usually takes under an hour. A typical multi-machine rollout takes a few days, with dashboards live from the first day.

Can you build something custom for us?

Yes. Our Custom Series covers new sensors, enclosures, protocols and firmware, designed and built by our own hardware team.

Do you ship outside Pakistan?

Yes. We ship nationwide and worldwide, and support remote setup over a video call.

Ready to hear what your machines have been saying?

Tell us about one machine. We'll tell you what to monitor, what it costs and what it could save.

Get a free recommendation or email info@iotize.org

Make every machine talk.Even the 30‑year‑old ones.

One plant. Seven devices. One server.

Hear a bearing wear out weeks early.

Every stroke counted. Every slowdown flagged.

The door stays shut. The data doesn't.

Know the conditions your machines run in.

Every reading goes to one server.

Problems find you, wherever you are.

That's a whole plant, monitored. Installed in under an hour.

Your machines are already warning you. Nobody is listening.

Breakdowns that "came out of nowhere"

Power bills nobody can explain

Production numbers from a notebook

Drivers circling for a space that's already empty

EV chargers you can't brand, bill or manage

One platform. Every signal your operation gives off.

See every kilowatt, per machine, per shift.

Catch failures weeks before they stop the line.

Real output, counted automatically, every shift.

Know every space. Guide every driver.

Launch your own EV charging network, under your brand.

From old machine to live data in three steps.

Clamp on

Connect

See & act

Every site gets its own dashboard.

Your data. Your servers. Your call.

We don't just sell devices. We support them for years.

Setup & installation help

Remote troubleshooting

WhatsApp, phone & email

Long-term device support

Start with one machine. Scale to the whole plant.

For legacy factories

For smart factories

Built to your spec

Guides for plant managers and engineers.

What Is Predictive Maintenance? Definition, How It Works & Benefits

How to Reduce Energy Consumption in a Factory: The Complete Guide

Parking Guidance Systems Explained: How an APGS Gets a Driver to an Open Space

What Is OCPP? A Plain-English Guide for Charger Owners

Questions factory owners ask us.

Ready to hear what your machines have been saying?